Cisco XR 12000 Reference page 180

show tech-support cef
• show cef ipv4 non-recursive
• show cef {ipv4 | ipv6}
• show cef {ipv4 | ipv6 | mpls} adjacency
• show mpls forwarding (if the mpls keyword is specified)
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
basic-services or cisco-support
cef
Examples
The following example shows a truncated output of the show tech-support cef command:
RP/0/0/CPU0:router# show tech-support cef terminal page
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-------------------------------- show version --------------------------------
Cisco IOS XR Software, Version 3.9.0
Copyright (c) 2007 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 1.43(20061109:045749) [CRS-1 ROMMON],
CRS-1 uptime is 1 week, 2 days, 20 hours, 29 minutes
System image file is "disk0:hfr-os-mbi-3.5/mbihfr-rp.vm"
cisco CRS-1/S (7457) processor with 4194304K bytes of memory.
7457 processor at 1197Mhz, Revision 1.2
16 GigabitEthernet/IEEE 802.3 interface(s)
4 Ethernet/IEEE 802.3 interface(s)
20 Packet over SONET/SDH network interface(s)
20 SONET/SDH Port controller(s)
2043k bytes of non-volatile configuration memory.
38079M bytes of hard disk.
1000592k bytes of ATA PCMCIA card at disk 0 (Sector size 512 bytes).
1000640k bytes of ATA PCMCIA card at disk 1 (Sector size 512 bytes).
Configuration register on node 0/1/CPU0 is 0x102
Boot device on node 0/1/CPU0 is mem:
Package active on node 0/1/CPU0:
hfr-sbc, V 3.8.0, Cisco Systems, at disk0:hfr-sbc-3.8.0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
172
show tech-support cef ipv4 brief
Built on Thu Mar 15 01:47:29 UTC 2007
By cisco.com in /file/3.8.0
Tech-Support Commands
Operations
read
read
OL-30353-01