Cisco XR 12000 Reference page 115

Fabric Management Commands
SRAM Parity
DMA Address
DMA Size
Fusilli Parity
PCI TRANS64
PCI Address
This table describes the significant fields shown in the display.
Table 20: show controllers fabricq errors Field Descriptions
Field
Error Count
Max Rate
Rate Exceeded Count
Related Commands
Command
show controllers fabricq drop, on page 102
show controllers fabricq frfab, on page 108
show controllers fabricq output, on page 112
show controllers fabricq queue, on page 115
show controllers fabricq registers, on page
118
show controllers fabricq tofab, on page 121
OL-30353-01
0 2
0 100
0 100
0 2
0 2
0 2
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
0
0
0
0
0
0
Description
Number of errors of each type.
Maximum number of errors of that type that can be
received per second.
Number of times that error has exceeded the Max
Rate.
When the rate is exceeded, the software may try to
restart the fabric queue driver and associated ASICs
or FPGAs to correct the problem.
Description
Displays the number of packets dropped to the fabric or from
the fabric on a per-slot basis in the fabric queue driver.
Displays output from the fabric statistics associated with the
fabric queue driver.
Displays the fabric output service statistics associated with the
fabric queue driver.
Displays information about the hardware queues of the
performance route processor chopper and assembler FPGAs.
Displays the hardware registers of the chopper and assembler
FPGAs.
Displays to fabric statistics associated with the fabric queue
driver.
show controllers fabricq errors
107