Show Controllers Fabricq Output - Cisco XR 12000 Reference

show controllers fabricq output

show controllers fabricq output
To display the fabric output service statistics associated with the fabric queue driver, use the show controllers
fabricq output command in administration EXEC mode.
show controllers fabricq output [location node-id]
Syntax Description
location node-id
Command Default
Information is displayed for all route processors (RPs) on the router..
Command Modes
Administration EXEC
Command History
Release
Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show controllers fabricq output command to display to fabric output service statistics. Specifying
a location displays information only if that location is an RP.
The service time is the time from when the RP CPU has made the packet ready to be sent to the slot to when
the Field-Programmable Gate Array (FPGA) has put the packet on the queue to that particular slot.
Note The show controllers fabricq output command is typically used for debugging purposes.
Task ID
Task ID
root-system
Examples The following is sample output from the show controllers fabricq output command for location 0/1/CPU0:
RP/0/0/CPU0:router# admin
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
112
(Optional) Displays statistical information for the designated node. The
node-id argument is entered in the rack/slot/module notation.
Modification
This command was introduced.
Operations
read, write
Fabric Management Commands
OL-30353-01