Show Tech-Support Sysdb - Cisco XR 12000 Reference

show tech-support sysdb

show tech-support sysdb
To automatically run show commands that display information specific to the System Database (SysDB),
use the show tech-support sysdb command in EXEC mode.
show tech-support sysdb {terminal [page]| file send-to [background] [compressed| uncompressed]}
[shared-plane| rack] [location node-id]
Syntax Description
terminal
page
file
sent-to
background
compressed
uncompressed
shared-plane
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
362
Displays the command output on the terminal.
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl-C keys to stop the command output.
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename Iam
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
(Optional) Displays the data for the shared plane.
Tech-Support Commands
OL-30353-01