Show Tbm Hardware - Cisco XR 12000 Reference

show tbm hardware

show tbm hardware
To displays tree bitmap hardware-related information, use the show tbm hardware command in EXEC mode.
show tbm hardware {ipv4| ipv6| mpls| vpnv4| table-id| afi-all| sw-only| dual| egress| ingress} {unicast|
multicast| safi-all} {dual| egress| ingress| sw-only} {brief| detail| lookup| prefix prefix-hex-string} location
node-id
Syntax Description
ipv4
ipv6
mpls
vpnv4
table-id
afi-all
sw-only
dual
egress
ingress
unicast
multicast
safi-all
dual
brief
detail
lookup
prefix
location node-id
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
80
Specifies IP Version 4 address prefixes.
Specifies IP Version 6 address prefixes.
Specifies MPLS-related tree bitmap information.
Specifies VPNv4-related tree bitmap information.
Specifies tree bitmap information for a specific table ID.
Specifies IPv4 and IPv6 commands.
Specifies software-only tree bitmap information.
Specifies tree bitmap information for dual, ingress, and egress, modes.
Specifies egress tree bitmap information.
Specifies ingress tree bitmap information.
Specifies unicast address prefixes.
Specifies multicast address prefixes. This option is supported for IPv4 address
families.
For subaddress family, specifies prefixes for all subaddress families. This
option is supported for IPv4 address families.
Specifies ingress and egress tree bitmap information.
Displays brief information.
Displays detailed information.
Displays key or address information to look up (longest match) in the table.
Displays prefix-related information.
Displays tree bitmap hardware-related information for a specified node. The
node-id argument is entered in the rack/slot/module notation.
Troubleshooting Commands
OL-30353-01