Table of Contents
Advertisement
5.1
System Software Configuration Utility
The AdamApax .NET Utility software offers a graphical interface that helps you con-
figure the ADAM-2000 series. It is also very convenient to test and monitor your
remote data acquisition and control system. The following guidelines will give you
some brief instructions on how to use this Utility. Before installing the ADAM.NET
Utility, remember to first install .NET Framework 3.5 or later from Microsoft website.
5.2
Installing AdamApax .NET Utility Software
Caution!
1.
2.
3.
Advantech provides a free download of AdamApax .NET Utility software for module
operation and configuration. You can find the Utility installation file in the CD with your
module, or on our website at: http://www.advantech.com and click the Download
Area under Service & Support to get the latest version of the ADAM.NET Utility. Once
you download and setup the Utility software, there will be a shortcut of the Utility pro-
gram on the desktop.
5.3
AdamApax .NET Utility Operation
After you have successfully installed AdamApax.NET Utility, there will be one short-
cut icon on the desktop. Double click the shortcut icon that you should be able to see
the operation window.
Figure 5.1 AdamApax .NET Utility Operation Window
ADAM-2000 Series User Manual
Make sure both coordination and devices are in Initial Mode
Ensure that you are using a minimum of Windows 2000, XP or
Windows 7
Before installing ADAM.NET Utility, you need to install the .NET
Framework 3.5 or later.
48
Advertisement
Table of Contents
