Adam-2520Z - Advantech ADAM-2000 Series User Manual

3.1.2

ADAM-2520Z

Wireless Sensor Network Modbus RTU Gateway
The ADAM-2520Z is designed as a gateway to translate the IEEE 802.15.4 WPAN to
Modbus Network. In a WPAN, the ADAM-2520Z works as a coordinator to collect and
translate data from end devices to host PC.
3.1.2.1 Specifications
Wireless:
 IEEE Standard: IEEE 802.15.4
 Modulation Type: DSSS (OQPSK)
 Frequency Band: ISM 2.4GHz (2.4 GHz ~ 2.4835 GHz)
 Channels: 11-26
 RF Data Rate: 250 Kbps
Transmit Power: 19 ± 1dBm

Receiver Sensitivity: -97 dBm

Antenna Type: Dipole

 Antenna Gain: 2 dBi
 Outdoor Range: 1000 m (Line of Sight)
 Topology: Star/ Tree/ Mesh
 Network Capacity: 32 nodes (Routers & End Devices)*
 Range Extenders: Maximum 5 Hops
 Function: Coordinator
*Note: Based on user's configuration
General:
 Connector:
– 1x plug-in terminal block (#14-22 AWG)
– 1x USB-type A connector (type A to B cable provide)
 Protocol: Modbus RTU
Baud Rate: 2400~115200bps

Power Input: Unregulated10 ~ 30 V

 Battery Input: 2 x AA Batteries
 Power Consumption:
– 0.8 W @ 24 V
– 0.5 W @ 5 V
– 0.3 W @ 3 V
 Operating Humidity: 20 ~ 95% RH
 Storage Humidity: 0 ~ 95% RH
 Operating Temperature:
– External Power -20°C ~ 70°C (-4°F ~ 157.9°F)
– Battery Power 0°C ~ 50°C (32°F ~ 122°F)
 Storage Temperature: -40°C ~ 85°C (-40°F ~ 185°F)
Note! ADAM-2510Z router and ADAM-2520Z gateway are always in normal
transmission mode during operation, and which power consumption will
be higher than other end devices to shorten battery life, therefore, sug-
gest ADAM-2510Z and ADAM-2520Z adopt external power input for
main power source and battery power for backup power source.
DC
DC
(USB)
DC
(2 x AA Batteries)
DC
23 ADAM-2000 Series User Manual