Advantech ADAM-2000 Series User Manual page 35

Analog Input
Channels: 6 (differential/Non-Isolation)

Input Impedance: > 10 MΩ (voltage) 120 Ω (current)

 lnput Type: mV, V, mA (Configure Different Range for Each Channel)
 Input Max: Voltage: +/-15V
 Common Mode Voltage: Up to 10V
lnput Range: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA, 0-20 mA, 4-20 mA

Accuracy: ±0.1% or Better (voltage) at 25°C, ±0.2% or Better (current) at 25°C

 Span Drift: ±30 ppm/°C
 Zero Drift: ±22 μV/°C
 Voltage Resolution:16 bit; ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
 Current Resolution:15 bit; ±20 mA
 Sampling Rate: 12 sample/second (total)
 CMR @ 50/60 Hz 100 dB
 NMR @ 50/60 Hz 65 dB
3.2.1.2 Connector Pin Define & Switch
Users can configure the switch define by the channel switch for each channel on
PCB (refer to the Figure below to see its location):
Switch:
Warning! When change analog input type please always disconnect the power
and analog input from your module whenever you are working on it, do
not change switch position while the power is on.
14 bit; 0 ~ 20 mA
13.5 bit; 4 ~ 20 mA
ON: ADAM-2017PZ: Current Input Mode
OFF: ADAM-2017PZ: Voltage Input Mode
DC
25 ADAM-2000 Series User Manual