Advantech ADAM-2000 Series User Manual page 51

4.2.2.2 Coordinator Configuration Flowchart
The section tells the user how to setup the Coordinator to host a PAN for a wireless
sensor network.
Please refer to
Appendix B for
troubleshooting.
Initial Mode:
Status LED turns on,
Error LED blinks.
No
Error LED turns off
Successfully host a
PAN with default PAN
ID and RF channel then
Amber LED turns on
indicating Pair ID.
Open AdamApax.NET
Utility to configure the
ADAM-2000 series,
refer to Chapter 5
for more information.
Install Power
Connect to PC through
USB or RS-422/485
All LEDs turn On
(Green LED turns on while powering by
external/USB power)
No
Configured ready for
Normal Mode
Yes
Yes
41 ADAM-2000 Series User Manual
Please refer to
Appendix B for
troubleshooting.
Normal Mode:
Status LED turns off,
Error LED blinks.
No
Error LED turns off
Yes
Successfully host a
PAN with user defined
PAN ID and RF channel
then Amber LED turns
on indicating Modbus
ID.
Collect and transmit
data/signal from end
nodes to host.