Selecting An Operator Interface - Advantech ADAM-2000 Series User Manual

2.2

Selecting an Operator Interface

To complete your data acquisition and control system, selecting an operator interface
is necessary. Adopting the Modbus protocol, ADAM-2000 series I/O modules exhibit
high ability in system integration for various applications. For reading the real-time
status of ADAM-2000 series modules anywhere without any engineering effort, there
is a lot of third-party Modbus software available.
To integrate ADAM-2000 series I/O with HMI, Human Machine Interface, software in
a SCADA, Supervisory Control and Data acquisition, system, there are a lot of HMI
software packages which support Modbus driver.
 Advantech Studio
 Advantech WebAccess
 Wonderware InTouch
 Intellution Fix of I-Fix
 Any other software which supports the Modbus protocol
ADAM-2000 Series User Manual 20