Table of Contents
Advertisement
4.2
Establish the Connection
4.2.1
Basic Installation
In the side of the ADAM-2000 series, users can find Mode Switch and Function
Button. The two hardware keys contain several combinations for device operations.
The default position of Mode Switch is set in the Initial Mode to configure the device
and establish connection for Normal Mode.
It is easily to use the ADAM-2000 series with default configuration. Push the Mode
Switch on the side of ADAM-2000 devices to Normal position then the PAN can be
operated to collect data from modules. The ADAM-2000 series also provides
advanced functions for further operations.
Initial Mode
The Initial Mode is for user to configure parameters of the ADAM-2000 devices.
While the device is in the Initial Mode, Status LED turns on.
1.
Push the Mode Switch to the Initial position.
2.
Open the AdamApax .NET Utility to search and configure the ADAM-2000
devices.
Normal Mode
After all the ADAM-2000 devices are configured in the same PAN ID and RF channel,
push the Mode Switch to Normal position to perform the Wireless Sensor Network.
Connection Steps in Initial Mode:
4.2.1.1
Coordinator
1.
Power on.
2.
All LEDs turn on for 0.5 second then turn off.
3.
Status LED turns on, Error LED blinks.
4.
Level Index turns on to indicate Pair ID 1. (Pair ID will automatically count if
there is a coordinator nearby.
5.
Error LED turns off when it hosts a PAN.
ADAM-2000 Series User Manual
36
Advertisement
Table of Contents
