I/O And Sensor Modules; Adam-2017Pz - Advantech ADAM-2000 Series User Manual

3.2

I/O and Sensor Modules

3.2.1

ADAM-2017PZ

Wireless Sensor Network 6-ch Analog Input Node
The ADAM-2017PZ is an analog input data acquisition module with 6 channels to
measure the voltage and current.
3.2.1.1 Specifications
Wireless:
 IEEE Standard: IEEE 802.15.4
 Modulation Type: DSSS (OQPSK)
 Frequency Band: ISM 2.4GHz (2.4 GHz ~ 2.4835 GHz)
 Channels: 11-26
 RF Data Rate: 250 Kbps
Transmit Power: 16 dBm (max peak power)

 Receiver Sensitivity: -97 dBm
 Antenna Type: Dipole
 Antenna Gain: 2 dBi
 Outdoor Range: 1000 m (Line of Sight)
 Topology: Star / Tree / Mesh
 Transmission Interval: 1 second ~ 24 hours
 Function: End Device
General:
 Connector: 1x plug-in terminal block (#14-22 AWG)
 Power Input: Unregulated 10 ~ 30 V
 Battery Input: 2 x AA Batteries
 Power Consumption: 0.5 W @ 24 VDC/ 16mA
– 420 uW @ 3 V
– 240 uW @ 3 V
– 150 uW @ 3 V
* Battery Peak Power Consumption: 50mA
 Operating Humidity: 20 ~ 95% RH
 Storage Humidity: 0 ~ 95% RH
 Operating Temperature:
– External Power -20°C ~ 70°C (-4°F ~ 157.9°F)
– Battery Power 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature: -40°C ~ 85°C (-40°F ~ 185°F)

Note! ADAM-2017PZ's power consumption will be higher than other end
devices to shorten battery life, therefore, suggest ADAM-2017PZ adopt
external power input for main power source and battery power for
backup power source.
This device should be installed and operated with minimum distance 20cm between
the radiating element of this device and the user
ADAM-2000 Series User Manual
DC
(1 minute Tx interval with 2 x AA Batteries)
DC
(2 minute Tx interval with 2 x AA Batteries)
DC
(5 minute Tx interval with 2 x AA Batteries)
DC
24