Table of Contents
Advertisement
4.3.3
Pairing
In the Initial Mode, Routers and End Devices must be associated with the corre-
sponding Coordinator. The function is for Router and End Devices only.
1.
Press the Function Button 5 times to enter the change Pair ID mode.
2.
Status LED blinks
3.
Level Index LED turns on to indicate Pair ID.
4.
Press the Function Button once to change Pair ID.
5.
Press and hold the Function Button for over 2 seconds to save and confirm the
Pair ID.
6.
Press the Function Button 3 times to associate with specific Pair ID Coordina-
tor.
7.
Error LED turns off when it join a PAN.
4.3.4
Associating Devices
Routers and End Devices must have to associate with corresponding Pair ID Coordi-
nator in Initial Mode to build up the wireless communication. The function is for
Router and End Devices only.
1.
Press the Function Button 3 times to join a PAN with specific Pair ID Coordina-
tor.
2.
Status LED turns on, Error LED blinks.
3.
Level LED turns on to indicate the Pair ID to associate with.
4.
Error LED turns off when it joins a PAN.
4.3.5
Reboot
Press the Function Button for over 3 seconds to reboot the device.
4.3.6
Button Function Table
Table 4.3: Button Functions
Press Button
2 Seconds
3 Seconds
Once
2 Times
3 Times
5 Times
Function
Confirm the Pair ID
Reboot
Link Quality Indicator
Battery Level
Network Association
Pair ID Selection
45
ADAM-2000 Series User Manual
Advertisement
Table of Contents
