The "Searching the network" dialog will pop up, click "Start" to search the ADAM-
2000 devices. The AdamApax .NET Utility search the ADAM-2000 Coordinators from
Initial mode Modbus ID 241(F1h)-244(F4h) [for Normal mode Modbus ID 245(F5h)-
249(F5h)], refer to Appendix A.2 for more information.
Figure 5.6 Searching the network dialog
The ADAM-2000 coordinators will be listed on the Tree View of the selected COM
port.
Figure 5.7 Searching the ADAM-2000 coordinators.
If you also want to connect ADAM-2000 series to utility at the same time,
1.
Make sure they are in initial mode
2.
Set PAN ID in the same group
53
ADAM-2000 Series User Manual