Table of Contents
Advertisement
4.2.1.2
Router/End Device
Routers and End Devices must have to associate with corresponding Pair ID Coordi-
nator in Initial Mode to build up the wireless communication. The function is for
Router and End Devices only.
1.
Power on.
2.
All LEDs turn on for 0.5 second then turn off.
3.
Press the
4.
Status LED turns on, Error LED blinks.
5.
Level Index turns on to indicate Pair ID 1. (Pair ID needs to be properly
configured if there are coordinators. For advanced settings, please refer to sec-
tion 4.3)
6.
If the Coordinator Pair ID is not 1, hold the Function Button for 2 seconds to
reboot your router or end-devices, then press Function Button 5 times to enter
Pair ID selection, the click N times according the Coordinator Pair ID, then hold
the Function Button for 2 seconds to confirm your setting, finally press the
Function Button 3 times to join a PAN.
7.
Error LED turns off when it join a PAN.
Function Button 3 times to join a PAN with the default Pair ID 1.
37
ADAM-2000 Series User Manual
Advertisement
Table of Contents
