Coordinator host a PAN in
Initial Mode
Routers and End Devices
join the PAN in Initial Mode
Connect the coordinator to
Open AdamApax .NET Utility
to configure the Coordinator,
Routers and End Devices for
Normal Mode.
Set the Coordinator, Routers
and End Devices to Normal
Mode. All the ADAM-2000
devices set in the same PAN
and RF channel will
automatically associate the
PAN for data acquisition.
ADAM-2000 Series User Manual
the PC.
Figure 4.4 ADAM-2000 Installation Chart
Install power of
All ADAM-2000 devices
No
setup ready to perform a
40
ADAM-2000
devices.
PAN.
Yes