Table of Contents
Advertisement
End-to-End
Connection
Half-Duplex
Full-Duplex
Full-Duplex
Configure Auto Negotiation on an iMcV-LIM by adjusting the DIP Switch
setting (for unmanaged modules) or via the management software. Refer to
the DIP Switch table for switch location and settings.
AUTOCROSS FEATURE FOR TW ISTED-PAIR CONNECTION
All twisted-pair ports on the iMcV-LIM includes AutoCross, a feature that
automatically selects between a crossover workstation and a straight-through
connection depending on the connected device.
Switch
Configure HDX manually
Configure FDX manually
Auto Negotiation is ON
13
iMcV-LIM
TX/FX
Auto Negotiation is OFF
Auto Negotiation is OFF
Auto Negotiation is ON
Advertisement
Table of Contents
