Power Save Mode; Setting The Time And Date; To Set The Time And Date - Dell 2335dn - Multifunction Monochrome Laser Printer B/W User Manual

4. Press Scroll ( or
5. Press Cancel (

Power Save Mode

The Power Save mode enables your printer to reduce power
consumption when it is not in actual use. You can enable this
mode by selecting the duration for which the printer waits
after a job is printed before it switches to a reduced power
state.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
The available options are 5, 10, 15, 30, 60 and 120
(minutes).
The factory default setting is 30 minutes.
5. Press Select (
6. Press Cancel (

Setting the Time and Date

The time and date are printed on all faxes.
NOTE: It may be necessary to reset the correct time and date if loss of power to the printer occurs.

To set the time and date:

1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
) to display the country you want and then press Select (
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Print Power Save and press Select (
) to display the time settings you want.
) to save the selection.
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Date & Time and then press Select (
Page 24 of 52
).
).
).
).
).
).
).