Pc Control Via Siucom Plus; Control Of Pc Programs Via The Treatment Center; Ethernet Connection Is Required; Third-Party Programs Can Also Be Controlled In This Manner - Sirona TENEO Service Manual

61 94 448 D 3509
D 3509.076.01.01.02 07.2008
6 PC connection / Networking
6.2

PC control via SIUCOM plus

6.2.1

Control of PC programs via the treatment center

SIUCOM plus enables you to control PC programs via the Sirona treatment
center TENEO. The PC functions can be operated via the user interface of the
treatment center (touch screen) or the system foot control.
6.2.2

Ethernet connection is required.

This is achieved through communication of the treatment center with the PC
via the Ethernet interface and the practice network. The function codes gen-
erated by specific operations in the treatment center are assigned to the
desired PC functions in the SIUCOM program. Under certain circumstances
it is therefore possible to start, terminate and control PC applications.
6.2.3

Third-party programs can also be controlled in this manner.

The SIUCOM plus PC program provides the Sirona SIUCOM plus interface
for operating functions inside PC programs of other manufacturers.
The operating functions provided by the manufacturer of the SIUCOM plus-
capable PC application can thus be triggered from the treatment center.
For further information, please see "Installation and Configuration - SIUCOM
plus" SN: 6084367.
6 – 3