Replacing The Staple Cartridge; (Staple Finisher-S1); Replacing The Staple Cartridge (Staple Finisher-S1) - Canon imageRUNNER ADVANCE C350P Starter Manual

Replacing the Staple Cartridge

(Staple Finisher-S1)

This section describes how to replace the staple case
and staple cartridge in the stapler unit. When the Staple
Finisher-S1 is almost out of staples and the staple
cartridge must be replaced, a screen prompting you
to replace the staple cartridge appears on the touch
panel display. Follow the procedure described below to
replace the staple cartridge.
NOTE
The Staple Finisher-S1 is an optional product.
)
We recommend that you order staple cartridges
)
from your local authorized Canon dealer before
your stock runs out.
Use only staple cases intended for use with this
)
machine.
01
Open the front cover of the finisher.
02
Grasp the staple case by the green tab
to pull it out from the stapler unit.
* Staple Case
*
03
Squeeze and lift the empty staple
cartridge by its sides marked with arrows to
remove it from the staple case.
NOTE
You can lift the staple cartridge only when no staples
are left inside the cartridge.
04
Insert a new staple cartridge into the
staple case.
IMPORTANT
Use only staple cartridges designed for use with this
)
machine. (See "Consumables, " on p.54.)
Only one staple cartridge can be inserted at a time.
)
Replacement Parts 45