Table of Contents
Advertisement
30 November, 1999
2.3.5 MEMORY RECEPTION CONDITIONS
User parameter switch 05 bit 1 allows the user to select how to treat an incoming
message that is without RTI or CSI.
User parameter switch 05 Bit-1:
Memory reception if no RTI or CSI received 0: Possible, 1: Impossible
If 0 is selected, the machine receives all messages regardless of RTI and CSI.
If 1 is selected (this is the default setting), the user parameter setting works in
combination with the following bit switch.
System Bit Switch 11 Bit 6:
Conditions for memory reception if no RTI or CSI is received.
0: Impossible; memory reception is available only after receiving the RTI or CSI.
1: Memory reception is possible if there is no mechanical (printer) error.
The default setting is 1. The default setting means that if the printer is working, it
will receive all messages. However, when there is a mechanical error in the printer,
the machine rejects such a message because no trace of the sender will be stored
in the machine.
2-35
SYSTEM FEATURES
Advertisement
Table of Contents
