Table of Contents
Advertisement
30 November, 1999
7.2 MECHANICAL PROBLEMS
7.2.1 ADF/SCANNER
1. Non Feed
Possible Cause:
• Use of the incorrect document type or size.
• The operation panel is not closed properly.
• The pick-up rollers and feed belt are dirty or worn out.
• The mechanical clutch mechanism for document pick-up is defective.
• Incorrect positioning of the separation roller.
• The scanner motor is defective.
Action:
1. Check whether a correct document type is being used.
2. Check that the operation panel is closed securely.
3. If the problem remains, do the following:
• Clean the pick-up rollers and feed belt with a soft cloth and water, and
replace them if damaged.
• Check the connection between the FCU (CN14) and the scanner motor.
• Replace the scanner motor.
MECHANICAL PROBLEMS
7-17
Advertisement
Table of Contents
