Table of Contents
Advertisement
PRINTING
2.2 PRINTING
2.2.1 PRINTING PROCESS - OVERVIEW
This machine uses a "write-to-black" system, with negative toner.
• The charge-brush roller gives the drum surface an approximate negative
charge of -750 V.
• The exposed area on the drum drops to about -200 V.
• The development roller carries toner to the latent image on the drum surface.
The bias voltages during printing:
Toner application roller : -650 V
Development roller: -400 V
• The transfer roller pulls the toner from the drum onto the paper.
A constant current of +4.3 µA is applied. The anti-static brush helps to
separate the paper from the drum.
• The cleaning blade removes any toner remaining on the drum after the image
transfers to the paper.
• This machine does not use quenching lamp.
-200V
+4.3 µ µ µ µ A
-1.2kV
-650V
(0V)
2-4
30 November, 1999
H545D521.WMF
Advertisement
Table of Contents
