Table of Contents
Advertisement
30 November, 1999
2.1.2 JAM CONDITIONS
The main CPU detects a document jam if one of the following conditions occurs.
Jam Condition
Non-feed
Incorrect sensor
conditions
Maximum document length
exceeded
Cover open
Error during feed-out
Description
The feed mechanism attempts to feed the
paper once every second for a maximum of
6 seconds. If the scan line sensor does not
detect the document within 6 seconds, the
monitor displays an error message.
The scan line sensor turns on while the
document sensor is off.
The scan line sensor does not turn off after
the maximum document length has fed
through it. This occurs after 11 seconds at
standard resolution for memory TX; 23
seconds at standard resolution for
immediate TX or detail resolution; or 46
seconds at fine resolution (all these times
are for a 1.2-m long document).
While the ADF is working, the ADF cover is
opened.
The scanner motor reverses when the final
page of the document feeds out of the
scanner and/or when removing a jammed
document. This error occurs when placing a
document into the feeder while the motor is
rotating.
2-3
SCANNER
Error
Code
1-00
1-01
No error
code
No error
code
Advertisement
Table of Contents
