Scanner Switches - Ricoh FAX2000L Service Manual

30 November, 1999

4.2.2 SCANNER SWITCHES

Scanner Switch 00
No FUNCTION
0-1 Not used
2
Maximum transmittable
document length
3 Bit 3 2
0 0
0 1
1 0
1 1
4 OR processing in immediate
TX and copying (Standard
resolution)
0: Disabled
1: Enabled
5 OR processing in immediate
TX and copying (Detail
resolution)
0: Disabled
1: Enabled
6-7 Not used
Scanner Switch 01 - Not used (do not change any of these settings)
Scanner Switch 02 - Not used (do not change any of these settings)
Scanner Switch 03 - Not used (do not change any of these settings)
Scanner Switch 04 - Not used (do not change any of these settings)
Scanner Switch 05 - Not used (do not change any of these settings)
Scanner Switch 06 - Not used (do not change any of these settings)
Scanner Switch 07 - Not used (do not change any of these settings)
Scanner Switch 08 - Not used (do not change any of these settings)
Scanner Switch 09 - Not used (do not change any of these settings)
Scanner Switch 0A - Not used (do not change any of these settings)
Scanner Switch 0B - Not used (do not change any of these settings)
Scanner Switch 0C - Not used (do not change any of these settings)
Scanner Switch 0D - Not used (do not change any of these settings)
Scanner Switch 0E - Not used (do not change any of these settings)
Scanner Switch 0F - Not used (do not change any of these settings)
Do not change these settings.
If the user wants to send very long documents
such as well logs, select the higher setting.
Setting
600 mm
1200 mm
Not used
Not used
0: The machine scans the document in 3.85
line/mm steps, then transmits or makes copies.
1: The machine scans the document in 7.7
line/mm steps. Each pair of lines goes through
OR processing before transmission or copy
making. Toner may be used up earlier if OR
processing is enabled.
0: The machine scans the document in 7.7
line/mm steps, then transmits or makes copies.
1: The machine scans the document in 15.4
line/mm steps.
Do not change these settings.
COMMENTS
4-21
BIT SWITCHES