Riello ALUDOMUS SOLAR KV/200 20 ISC SOLAR Installation And Maintenance Manual page 82

THECNICAL ASSISTANCE SERVICE
LIST OF MANUFACTURER LEVEL PARAMETERS
N° Description
558 g flags (= b7b6b5b4b3b2b1b0)
b0=THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
b1=Type of building
b2=Connect probe/thermostat kettle
b3=THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
b4=THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
b7b6b5=THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
596 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
604 Setting flags (= b7b6b5b4b3b2b1b0)
b1b0=Conduct local time, or tab / System
b2=Power distribution bus LPB
b3=Synchronization and power supply on LPB
b4=Flag for nonvolatile storage of event behavior of LMU... on LPB
b6b5=DHW charging for own HC, own segment, all
b7=Priority of RVS... request over external predefined output
605 LPB device number
606 LPB segment number
618 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
619 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
620 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
621 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
625 Set limit for the number of operating hours (interval) since last
service visit
0/1=light/heavy
b2=1-------> Thermostat kettle (*)
b2=0-------> Kettle sensor
0...255
00= Self
01= Slave without remote adjustment
10= Time master system
0=Distributed bus power supply OFF
1=Distributed bus power supply ON
0=Distributed bus power supply OFF
1=Distributed bus power supply ON
0=Events Disable, not permitted
1=Events Enable, permitted
00 = Local
01 = Segment
10 = System
0/1=NO priority/YES
82
Range U/M Default
setting
1
s 120
1
0
0
0
0
0
0...9998 h
0
0
0
0
0
0 0 0
00
0
0
1
00
0
0