Riello ALUDOMUS SOLAR KV/200 20 ISC SOLAR Installation And Maintenance Manual page 81

LIST OF MANUFACTURER LEVEL PARAMETERS
N° Description
501 Min. room setpoint
Adjustable with external probe connected
502 Max. room setpoint
Adjustable with external probe connected
506 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
507 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
511 Boiler frost protection switch-on temperature
5°C<=par. 511<=par. 512
512 Boiler frost protection switch-off temperature
par. 511<=par. 512<=50°C
514 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
516 Summer / winter changeover temperature
(30°C=changeover deactivated)
517 Max. control differential
when exceeded, minimum pause time will be aborted
519 Design outside temperature (for sizing the heating plant)
520 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
532 Heating curve slope heating circuit 1
533 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
534 Room setpoint readjustment heating circuit 1
535 THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
552 Hydraulic system adjustment
553 Configuration of heating circuits
555 Setting flags (= b7b6b5b4b3b2b1b0)
b0b1=DHW priority
b2= Assignment of terminal (TA)
b3=THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
b4=Frost protection for the plant
b5=THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
b6=THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
b7=THIS PARAMETER IS NOT USED IN THIS BOILER
DON'T CHANGE THE SETTINGS
b0b1=00 ----> Absolute
b0b1=01 ----> No priority
b2=1-------> Time switch
b2=0-------> Room thermostat
0/1=OFF/ON)
81
THECNICAL ASSISTANCE SERVICE
Range U/M Default
setting
10...30 °C
10...30 °C
5...50 °C
5...50 °C
8...30 °C
0...90 K
-50...20 °C
1...40
-31...31 K
0...255
0...255
10
30
20
45
5
10
15
20
30
-5
10
20
10
0
0
66
10
00
0
0
1
0
0
0