Setting Up Power Cable For Ignition Function - Nexcom VMC 3000 User Manual

Appendix I: Setting Up Power Cable for Ignition Function
Appendix I: Setting Up Power Cable for Ignition Function
Our power connector has 3 pins: Ignition / VCC / GND. When using power
from a battery, Ignition must be in contact with the VCC, or it can contact
a switch, simulated engine start, to start the system.
Below is an example for your reference.
VCC
GND
ignition
175
Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved VMC 3000/4000 Series User Manual