Power-On Delay Setting - Nexcom VTC 1021 Series User Manual

Appendix D: Vehicle Power Management Setup
Set the startup voltage to 12.5V or 25V and the shutdown voltage
to 11.0V or 22V
If the input voltage is 12V: the startup voltage to 12.5V and the shutdown
voltage to 11.5V.
If the input voltage is 24V: the startup voltage to 25V and the shutdown
voltage to 23V.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Power Management Configuration settings
Input Voltage
Startup,Shutdown
Delay Time Setting
Power On Delay
Power Off Delay
(11.5, 10.5) / (23,21)
(12.0, 11.0) / (24,22)
(12.5, 11.0) / (25,22)
(12.5, 11.5) / (25,23)
Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
Startup,Shutdown Setting.
[9-36V]
[(11.5,10.5)/(23,21)]
[Disable]
[Disable]
Startup,Shutdown
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Power-on Delay Setting

Disable Power-on Delay
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Power Management Configuration settings
Input Voltage
Startup,Shutdown
Delay Time Setting
Power On Delay
Power Off Delay
Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc.
58
Power On Delay Setting.
[9-36V]
[(11.5,10.5)/(23,21)]
[Disable]
[Disable]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
VTC 1021 Series User Manual