Cleaning Outer Surfaces - ProJet 1000 User Manual

2. Cleaning Outer Surfaces

To maintain high print quality and performance, thoroughly clean printer between prints and whenever print quality problems occur.
Cleaning Surfaces
Clean outer surfaces as needed following the guidelines below:
1. Clean printer with a lint free cloth.
2. Remove dust from outer surfaces of the printer by wiping with a clean dry, lint-free cloth.
3. Dust and clean inside and outside surfaces. Remove dirt and grease from printer outer surfaces by spraying all-purpose cleaner on a
clean cloth and gently wiping.
4. Use only non-abrasive, alcohol-free cleaners to clean outer surfaces. Do not use all-purpose cleaners containing petroleum-based
polishing agents such as liquid wax. Spray the cleaner on the cloth, not on the surface.
5. Do not use any cleaning solvents on the imaging mirrors as this can damage its protective UV coating.