Prints Queue - ProJet 1000 User Manual

Prints Queue

On the "Home" page, click on "Prints" and select "Queue" in the drop down menu to view "Prints Queue" screen.
The purpose of the Prints Queue page is to provide a list of all available prints created on your printer. The list also provides specific information
for each print.
A Link in blue is the Print Name given by the user.
B Next to each Print Name is one of four icons:
Blue Matrix icon shows a print that is not active, but waiting in the queue or Queue icon
Green check mark shows print that has completed, and waiting to be removed form the printer
Red Triangle shows print that is aborted or Aborted icon.
C Estimated Print Time-If the print has the Active Icon then the time shown is the estimated time left in the print to completion.
If the print has the Queue icon then the time shown is an estimate of the complete time of the print.
D Print Material used- This only is given for the Active icon, and shows the current amount of material used thus far in the print.
E Estimated Print Material used is an estimate of the amount of material to be used in the given print.
F Each Print name also has the print material the print was created to build listed underneath.
G Up\Down arrows allow for prints to be prioritized in the queue. Note: that a print that has already started may not be moved.
G The red X is used to Delete a print. When pressed the User will be prompted to acknowledge that choice before the printer will execute the
abort.
Yellow spinning status circle shows a print that is currently being printed or Active icon