ProJet 1000 User Manual page 92

3. Parts will be
sliced in Print
Preview
before it is
sent to the
printer's
queue.
NOTE: Parts
will shrink in
X and Y. The
degree of
shrinkage
depends on
print
geometry.
3D Systems
recommends
that the
default value
should be
used until the
user has
enough
experience or
collects
enough data
to determine
that different
values are
needed.
NOTE:
Shrink
Comp % is
not the
same thing
as "scaling"
a print. Do
not use
Shrink
Comp % to
change the
final size of
the print.
Rather, use
Shrink
Comp % to
compensate
for size and
shape
changes
that happen
as a result
of the 3-D
modeling
process.
Tips on Submitting Prints
To select more than one STL file In the dialog box, hold down the Ctrl key and click on several STL files.
To add parts in the Preview
STL files if desired.
window: After adding STL file (s), using the Preview window, view the job in three dimensions and add more