Visijet® Fti Material - ProJet 1000 User Manual

VisiJet® FTI Material
Failure
Cartridge Interface RFID reader
can not read RFID tag on
cartridge.
Material is not adhering to the
platform.
Material is not adhering to the
print pad.
Streaks in coating.
Cause
Cartridge may not be
properly installed into the
bridge.
Cured solids may be on the
image plane.
Image plane may have debris
on it.
Scraper/coater bar may have
debris on the coating surface.
Solution
Ensure cartridge is installed correctly and reboot the printer. If problem
presist, contact your authorized 3D Systems Reseller representative.
Clean and remove cured solids from the image plane.
Verify that the Image Plane is clean and is functioning properly. Confirm
UV output is sufficient.
Pause and run the diag routine for scrape/coat. If streaks persist, pause, lift
shuttle plate and wipe blade clean to remove debris on coating surface.