Imager Error Messages - ProJet 1000 User Manual

Imager Error Messages

ERROR MESSAGE
"ERROR.BUILD_MISSING_IMAGER_CALIBRATION" IMAGER_CALIBRATION
"ERROR.BUILD_MISSING_UV CALIBRATION"
"ERROR.IMAGER_AUTO_PROFILE_FAILED"
CAUSE SOLUTION
PLEASE CONTACT YOUR SERVICE REPRESENTATIVE
IS NOT PRESENT IN TO GET IMAGER_CALBRATION ENABLED.
SOFTWARE.
UV_CALIBRATION IS PLEASE CONTACT YOUR SERVICE REPRESENTATIVE
NOT PRESENT IN TO GET CALIBRATION ENABLED.
SOFTWARE.
BULB MAY BE BAD OR CHECK BULB STATUS. IF BULB STATUS IS LESS THAN
NEEDS REPLACING. 50% OR OVER 1000 HOURS CONSIDER REPLACING
BULB. IF BULB STATUS DOES NOT MEET EITHER OF
THESE TWO CRITERIA CONTACT YOUR SERVICE
REPRESENTATIVE.