Material Cartridge Error Messages - ProJet 1000 User Manual

Material Cartridge Error Messages

ERROR MESSAGE
"ERROR.BUILD_MATERIAL_INCOMPATIBLE"
"ERROR.MATERIAL_CARTRIDGE_EMPTY"
ERROR.MATERIAL_CARTRIDGE_EXPIRED"
"ERROR.MATERIAL_CARTRIDGE_NOT_FOUND" CARTRIDGE MAY NOT BE FULLY
"ERROR.MATERIAL_CARTRIDGE_NOTMATCH"
CAUSE
BUILD MATERIAL IN PRINT DOES
NOT MATCH BUILD MATERIAL IN
CARTRIDGE.
EMPTY CARTRIDGE
THE EXPIRATION DATE SHOWS THE
MATERIAL CARTRIDGE TO BE
EXPIRED.
SEATED IN BRIDGE.THE MATERIAL
CARTRIDGE IS NOT FOUND IN THE
PRINTER.
THE PRINT MATERIAL AT THE TOP
OF THE QUEUE AND THE
CARTRIDGE MATERIAL IN THE
PRINTER DO NOT MATCH.
SOLUTION
VERIFY CARTRIDGE IS INSTALLED TO
MATCH THE BUILD MATERIAL IN THE
PRINT YOU DESIRE.
MATERIAL CARTRIDGE IS EMPTY. A NEW
MATERIAL CARTRIDGE WILL BE NEEDED
TO CONTINUE PRINTING.
A NEW MATERIAL CARTRIDGE WILL BE
NEEDED TO CONTINUE PRINTING.
1. CHECK TO INSURE THE MATERIAL
CARTRIDGE HAS BEEN INSERTED.
2. IF THE PRINTER IS NOT SEEING
THE MATERIAL CARTRIDGE, OPEN
THE SIDE DOOR AND REINSERT
THE MATERIAL CARTRIDGE.
3. IF THE PRINTER STILL DOES NOT
SEE THE MATERIAL CARTRIDGE, IT
MAY BE NECESSARY TO REBOOT
THE PRINTER.
VERIFY THE PRINT MATERIAL REQUIRED
FOR THE DESIRED PRINT, AND INSTALL
THE SAME MATERIAL CARTRIDGE AND
MATERIAL TRAY.