1. Manuals
  2. Brands
  3. ProJet Manuals
  4. 3D Printers
  5. MJP 2500W
  6. Quick start manual

ProJet MJP 2500W Quick Start Manual

Hide thumbs Also See for MJP 2500W:
Table of Contents

Advertisement

Quick Links

Download this manual
8/10/22, 2:55 PM
Quick Start Guide
Please refer back to http://infocenter.3dsystems.com/projetmjp2500w/quick-start-guide for the most up-to-date quick start guide
Introduction
ProJet MJP 2500W
The ProJet® MJP 2500W 3D printer system is a Multi-Jet Printer (MJP) printer. The solid imaging 3D printer produces wax casting patterns
from 3D solid Computer-Aided Design (CAD) models and through the 3D printer system client software. The parts are generated in a rapid
prototype (RP) environment. The primary features of the printer are the user interface, build chamber including the print engine, and the material
delivery module (MDM), which contains the materials and waste bag.
VisiJet® Materials for ProJet® MJP 2500W
ProJet® MJP 2500W
NOTE:  The ProJet® MJP 2500W is a wax printer and thus has no UV lamps installed.
 
infocenter.3dsystems.com/projetmjp2500w/print/book/export/html/861
P r o J e t M J P   2 5 0 0 W   / I C
 
Quick Start Guide
 
 
p/n 33-D130 Rev C
 
Original Instructions
VisiJet® M2 Cast (PW - Part Wax)
VisiJet® Wax Jewel Red (PW - Part Wax)
Quick Start Guide
®  
1/26

Advertisement

Table of Contents
loading

Related Manuals for ProJet MJP 2500W

Summary of Contents for ProJet MJP 2500W

  • Page 1 ProJet MJP 2500W The ProJet® MJP 2500W 3D printer system is a Multi-Jet Printer (MJP) printer. The solid imaging 3D printer produces wax casting patterns from 3D solid Computer-Aided Design (CAD) models and through the 3D printer system client software. The parts are generated in a rapid prototype (RP) environment.
  • Page 2 ProJet MJP 2500 IC The ProJet® MJP 2500 IC 3D printer system is a Multi-Jet Printer (MJP) printer. The solid imaging 3D printer produces wax casting patterns from 3D solid Computer-Aided Design (CAD) models and through the 3D printer system client software. The parts are generated in a rapid prototype (RP) environment.

  • Page 3: Safety Information

    8/10/22, 2:55 PM Quick Start Guide Safety Information Safety Symbols and De nitions ELECTRICAL SHOCK HAZARD: High voltage electricity is accessible in the vicinity of this sign or behind the access panel. High voltage can cause severe burns or death, as well as res. Access panels are for service only and should be opened only by certi ed service personnel or trained maintenance personnel.
  • Page 4 Material Handling and Safety Prior to using the ProJet® MJP 2500 and 2500 Plus ,  users should be aware of potential hazards which may result in exposure to uncured part material, such as removal of the material waste bag and handling part material cartridges.
  • Page 5 It is important not to lay material cartridges that are partially used on their side. Doing so will cause material to seep through the vent cap and clog cap. This will cause damage to the material cartridge if used for a later print. To store a partially used Material Cartridge, place it upright in a ProJet® 2500 Cartridge Holder and tighten the vent cap. Recerti cation Date Always check material "Recerti cation Date"...
  • Page 6 8/10/22, 2:55 PM Quick Start Guide   Disposal Support Material  Support material has no known regulatory requirements and may be disposed of in ordinary o ce waste.   Spilled Material Spills of material are unlikely, and should NOT occur in normal operation of the 3D printer system. Spills of support material can be cleaned without the use of protective gear, and disposed of as o ce waste.

  • Page 7: Printing Area

    Refer to your Post Processing Guide for more information. ProJet® MJP 2500W /IC Printer System Print Engine : The Print Engine contains major systems such as the Printhead, and Planarizer. Build Chamber: The Build Chamber is the area where the print platform can be found. All print jobs are built on the print platform. For more...

  • Page 8: Printer System Components

    Smart Cartridge Technology: All cartridges incorporate smart cartridge technology that enables the ProJet® MJP 2500W / IC to verify that the user does not use the wrong material, use material incorrectly, or use empty or expired containers, ensuring the material is safe to use.

  • Page 9: Additional Documentation

    ProJet® MJP 2500W / IC Material and Post Processing Guide The Material Guides detail the use of materials that have been certi ed for use in the ProJet® 2500W / IC. Each material has its own Material Guide. Information speci c to each material is included in these guides. An electronic version of this document is available at http://infocenter.3dsystems.com/projetmjp2500w/post-processing-guide.
  • Page 10 8/10/22, 2:55 PM Quick Start Guide Status Tab (A) The rst tab on the UI. The following features are accessed under the Status Tab (A). Refer to 1-7 for information that appears on this screen.  The left side tiles describe job status, the right side tiles describe printer status. Access Platform - Pressing this button provides access to the print platform.
  • Page 11 8/10/22, 2:55 PM Quick Start Guide   Prints Tab (B) Second Tab on the UI. 1. Opens up the Print Queue to manage the print queue of jobs for the printer. NOTE: Clicking on the Info button brings up print job information; reorder jobs in queue using the arrow buttons.  ...
  • Page 12 8/10/22, 2:55 PM Quick Start Guide Material Information - Clicking on the material level in any one of the four of the material status screens will bring up an information box about that particular cartridge of material. Information listed here is: Material - Type of material in cartridge Level - Percentage of material remaining in cartridge Weight - Weight of material in cartridge...
  • Page 13 8/10/22, 2:55 PM Quick Start Guide 1. Printer Info - Displays printer and version information.  2. Customer Usage - Displays customer’s printer usage. 3. Material Usage – Displays the material and amount using in the printer 4. Diagnostics - Many diagnostic procedures can be run under the Diagnostics button. See Diagnostics Menus below for more information.
  • Page 14 8/10/22, 2:55 PM Quick Start Guide 8. View Fault Logs - A history of fault codes is stored under the Fault History. 9. Unlock Top Door -  This button will allow the top door to unlock if the printer is in a Ready or Error State. 10.
  • Page 15 8/10/22, 2:55 PM Quick Start Guide infocenter.3dsystems.com/projetmjp2500w/print/book/export/html/861 15/26...

  • Page 16: Installing New Material Cartridge

    Perform a successful Demo build. Completion of this process will familiarize you with all of the “basic” printer operations needed to build parts on the ProJet® MJP 2500W / IC and provides a functional “run through” for a new installation.  It is strongly recommended that you complete Section 5 before moving on to larger more sophisticated builds.
  • Page 17 8/10/22, 2:55 PM Quick Start Guide 2. If drawer is not already open, push to unlock drawer. 3. Pull open the MDM drawer. NOTE: The steps to install a support cartridge are the same as installing a part cartridge. NOTE: To install cartridges into the MDM drawer properly ensure that the small cap be installed away from the user. NOTE: It is important to verify the cartridges have been audibly clicked into place, have material in them, and the cartridge caps properly ventilated;...
  • Page 18 8/10/22, 2:55 PM Quick Start Guide . Close the MDM drawer (B), by pushing in the dimple at the top until it’s latched securely. 7. Check the material level under the Materials tab (C) on the UI to ensure cartridge is seated properly into MDM and ready to print.  ...
  • Page 19 8/10/22, 2:55 PM Quick Start Guide NOTE: It is important to verify the type of material currently in the MDM before proceeding with these steps. NOTE: Cartridges cannot be removed from a cold printer. The printer must be warm before drawer will open and cartridges can be removed.
  • Page 20 1. Verify that the printer is in READY. 2. Select Materials tab. ProJet® MJP 2500W ProJet® MJP 2500 IC   3. Select   next to the Waste Bag status bar. 4. Wearing protective Nitrile gloves, open the MDM drawer.
  • Page 21 8/10/22, 2:55 PM Quick Start Guide The Waste Bag routine can also be accessed from the Operator Maintenance window: . Unfold cardboard insert. 9. Carefully place insert inside of plastic waste bag.  Do not push down insert fully to the bottom of bag as this may cause the waste bag to tear. Note: Do not push down insert fully to bottom of bag as this may cause waste bag to tear.

  • Page 22: Print Platform Removal And Installation

    Print Platform Removal and Installation 1. Ensure the printer is turned on and the Printer State is in Ready or Standby mode. ProJet® MJP 2500W ProJet® MJP 2500 IC 2. Select the Access Platform button next to the light bulb icon on the printer touch screen.
  • Page 23 8/10/22, 2:55 PM Quick Start Guide . A message will display (see below) asking user to con rm that the platform is clean, verify the platform is clean. NOTE: Always be sure you are installing a room temperature print platform that is clean on both sides to avoid any printing issues. Also, con rm that the print platform is free from damage due to any drops or dings.
  • Page 24 8/10/22, 2:55 PM Quick Start Guide Shutting Down Printer SHUTTING DOWN PRINTER NOTE: Unless the printer will be idle for an excessively long time (more than 60 days) it is not necessary to shut it down. Shutting down the print wait times for warming, because it is warming from a cold state.
  • Page 25 8/10/22, 2:55 PM Quick Start Guide . The Printer Shutdown screen will appear next. This lets the user know that the printer is shutting down and not to take any action. 7. A message will then come up that states it is now safe to turn the power switch off. Turn off the printer switch on the back of the printer. NOTE: Unless the printer will be idle for an excessively long time (>60 days) it is not necessary to shut it down.
  • Page 26 8/10/22, 2:55 PM Quick Start Guide infocenter.3dsystems.com/projetmjp2500w/print/book/export/html/861 26/26...

Table of Contents