Installing and Connecting B5 Redundant Power Systems
Rack Mounting the Chassis
Refer to Figure 2‐9 or Figure
cm) rack:
1.
Position the chassis between the vertical rails
brackets with those in the rack frame.
2.
Fasten the chassis securely to the rails using the customer‐supplied mounting screws (four for
the STK‐RPS‐150CH2, ten for the STK‐RPS‐150CH8).
Figure 2-9
1 STK-RPS-150CH2 chassis
2 Rails of 19-inch rack
2-16 Installation
2‐10 and proceed as follows to install the chassis into a 19‐inch (48.3‐
Fastening the STK-RPS-150CH2 to the Rack
and align the mounting holes in the chassis
3 Mounting screws