Attaching The Brackets And Installing In A Rack; Attaching The Rackmount Brackets - Enterasys B5G124-24 Hardware Installation Manual

Warning: Before rack-mounting the switch, ensure that the rack can support it without
compromising stability. Otherwise, personal injury and/or equipment damage may result.
Advertencia: Antes de montar el equipo en el rack, asegurarse que el rack puede soportar su peso
sin comprometer su propia estabilidad, de otra forma, daño personal o del equipo puede ocurrir.
Warnhinweis: Überzeugen Sie sich vor dem Einbau des Gerätes in das Rack von dessen
Stabilität, ansonsten könnten Personenschäden oder Schäden am Gerät die Folge sein.
Note: Do not install the rubber feet if you are rack mounting the switch.

Attaching the Brackets and Installing in a Rack

Proceed as follows to install the switch into a 19‐inch rack:
1. Attach the rackmount brackets to the switch, as shown in Figure
mm flathead screws shipped with the switch.
Figure 2-3
1 Rackmount brackets
2. With the mounting brackets attached, position the switch between the vertical frame members
of the 19‐inch rack as shown in Figure
four customer‐supplied mounting screws.

Attaching the Rackmount Brackets

2 M3x6 mm flathead screws
2‐4. Then fasten the switch securely to the frame using
Enterasys B5 Gigabit Ethernet Switch Hardware Installation Guide 2-5
Rack Mounting the Switch
2‐3, using the eight M3x6