Attaching The Rackmount Brackets; Fastening The Switch To The Rack - Enterasys Matrix E1 1G694-13 Installation Manual

Installation
Proceed as follows to install the switch into a 19-inch rack:
1. Attach the rackmount brackets
6 mm flathead screws
Figure 3-6 Attaching the Rackmount Brackets
➀
Rackmount brackets
2. Position the switch between the rails of the 19-inch rack
the switch securely to the frame using four mounting screws
Figure 3-7 Fastening the Switch to the Rack
➀
Rails of 19-inch rack
➀
to the switch, as shown in
➁
from the rackmount kit.
➁
➁
Figure
À
Á
M3 x 6 mm flathead screws (8)
➀
as shown in
➁
À
Á
Mounting screws (4)(supplied by user)
Rackmount Installation
3-6, using the eight M3 x
Figure 3-7. Then fasten
(user supplied).
Hardware Installation 3-11