Stk-Rps-500Ps - Enterasys B5G124-24 Hardware Installation Manual

STK-RPS-500PS

The STK‐RPS‐500PS provides power backup to an Enterasys PoE‐compliant B5 stackable switch. If
for some reason the switch looses power from its internal power supply, the STK‐RPS‐500PS can
provide up to 500 watts maximum operating power to support switch operation and the 48 Vdc
necessary to support 48 Vdc/data connections to PDs (Powered Devices).
Figure 2‐13 shows the front and rear view of the STK‐RPS‐500PS power supply.
Figure 2-13
1 STK-RPS-500PS (front view)
2 LED status indicator
3 Redundant Power Supply connector
The STK‐RPS‐500PS is shipped with the following:
• AC power cord
• RPS cable
• Four rubber feet (for flat surface installation)
• Two rack mount brackets
• Eight flathead screws (M3x6)
STK-RPS-500PS (front and rear view)
Installing and Connecting B5 Redundant Power Systems
4 STK-RPS-500PS (rear view)
5 Air vents for cooling
6 AC power input connector
Enterasys B5 Gigabit Ethernet Switch Hardware Installation Guide 2-19