3.
Fasten the power supply to the chassis using the captive screws on the PSM front panel.
4.
Repeat steps 2 and 3 for each additional power supply.
5.
Proceed to "Installing the Shelf into the Rack" on page 2‐15 for the rack mount installation
instructions.
Figure 2-7
STK-RPS-150PS Installation in an STK-RPS-150CH2 Shelf
1 STK-RPS-150CH2 shelf
2 STK-RPS-150PS power supply
Installing and Connecting B5 Redundant Power Systems
3 Shelf power supply slot
4 Captive screws (2)
Enterasys B5 Gigabit Ethernet Switch Hardware Installation Guide 2-13