B5 Switch Back Panels (Non-Poe B5 Switches); B5 Switch Back Panels (Poe B5 Switches); Stack Connection Port Cover - Enterasys B5G124-24 Hardware Installation Manual

Overview
Figure 1‐5 and Figure
Figure 1-5
1 Stack connection ports (shown without covers)
2 Rotary switch
3 Password reset button
Figure 1-6
1 Stack connection ports (shown without covers)
2 Rotary switch
3 Password reset button
Figure 1-7
1 Stack connection port covers
1-4 Introduction
1‐6 show the back panels of the B5 switches.

B5 Switch Back Panels (Non-PoE B5 Switches)

B5 Switch Back Panels (PoE B5 Switches)

Note: By default, the stack connection ports are covered with removable covers. If you are not
connecting stacking cables, you must keep the covers on the stack connection ports to prevent EMI
leakage. If you remove the stacking cables, you must replace the cover on the stack connection
ports. See Figure 1-7.

Stack Connection Port Cover

4 AC power input connector
5 Redundant power supply (RPS) connector
(shown without cover)
4 AC power input connector
5 Redundant power supply (RPS) connector
(shown without cover)