Attaching Brackets And Installing In Rack; Attaching The Rackmount Brackets; Fastening The Switch To The Rack - Enterasys SecureStack C2 C2G170-24 Hardware Installation Manual

Rack Mounting the Switch

Attaching Brackets and Installing in Rack

Proceed as follows to install the switch into a 19‐inch rack:
1. Attach the rackmount brackets to the switch, as shown in Figure
M3 x 6 mm flathead screws shipped with the switch.
Figure 3-6
Á
1 Rackmount brackets
3. With the mounting brackets attached, position the switch between the vertical frame
members of the 19‐inch rack as shown in Figure
to the frame using four mounting screws (user supplied).
Figure 3-7
1 Rails of 19-inch rack
3-10 Hardware Installation
Warning: Before rack-mounting the device, ensure that the rack can support it without
compromising stability. Otherwise, personal injury and/or equipment damage may result.
Advertencia: Antes de montar el equipo en el rack, asegurarse que el rack puede
soportar su peso sin comprometer su propia estabilidad, de otra forma, daño personal o
del equipo puede ocurrir.
Warnhinweis: Überzeugen Sie sich vor dem Einbau des Gerätes in das Rack von dessen
Stabilität, ansonsten könnten Personenschäden oder Schäden am Gerät die Folge sein.

Attaching the Rackmount Brackets

À

Fastening the Switch to the Rack

Á
À
2 M3 x 6 mm flathead screws
3‐7. Then fasten the switch securely
Á
À
2 Mounting screws (supplied by user)
3‐6, using the eight
À Á