Installing The Stk-Rps-500Ps; Attaching The Rackmount Brackets - Enterasys B5G124-24 Hardware Installation Manual

Installing and Connecting B5 Redundant Power Systems

Installing the STK-RPS-500PS

You can install the STK‐RPS‐500PS on a flat surface or in a 19‐inch rack.
Locate the STK‐RPS‐500PS within 152 cm (5 ft) of its power source.
Rack Mounting the STK-RPS-500PS
To install the STK‐RPS‐500PS in a 19‐inch rack, you need:
• Two rackmount brackets and mounting screws (rackmount kit) shipped with the
STK‐RPS‐500PS.
• Four customer‐supplied screws to attach the STK‐RPS‐500PS to a standard 19‐inch rack.
To install an STK‐RPS‐500PS in the shelf:
1. Attach the rackmount brackets to the STK‐RPS‐500PS, as shown in Figure
M3 x 6 mm flathead screws shipped with the STK‐RPS‐500PS.
Figure 2-14
1 Rackmount brackets (2)
2-20 Installation

Attaching the Rackmount Brackets

2 M3 x 6 mm flathead screws (8)
2‐14, using the eight