Installing A 16 X 2.5-Inch Hot-Swap Hdd Assembly Kit With Expander For 12Gb Raid - Lenovo System x3650 M4 Installation And Service Manual

Figure 69. SAS power cable routing
Step 13. If you removed any fans, install them.
Step 14. Insert the hard disk drives and the fillers the rest of the way into the bays.
If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on
page 136.
Installing a 16 x 2.5-inch Hot-Swap HDD Assembly Kit with Expander
for 12Gb RAID
Use this information to install a 16 x 2.5-inch Hot-Swap HDD Assembly Kit.
You can install a System x3650 M4 16 x 2.5-inch Hot-Swap HDD Assembly Kit with Expander for 12Gb. See
http://www.lenovo.com/ serverproven/ for a list of supported optional devices. To order a 16 x 2.5-inch
Hot-Swap HDD Assembly Kit with Expander for 12Gb RAID,contact your sales representative or reseller.
The 16 x 2.5-inch Hot-Swap HDD Assembly Kit with Expander for 12Gb RAID contains the following
components:
• One expander
• One backplane connection cable
SAS/SATA
power cable
.
Chapter 2 Installing optional devices
85