Lenovo System x3650 M4 Installation And Service Manual page 100

c. Rotate the expander upright so that the bracket goes underneath the latch and tabs on the
chassis and is engaged into the slots on the backplane bracket.
Step 7. Touch the static-protective package that contains the RAID adapter to any unpainted metal surface
on the server. Then, remove the RAID adapter from the package.
Step 8. Remove the PCI riser-card assembly 1 (see "Removing a PCI riser-card assembly" on page 37).
Step 9. Install the RAID adapter in the connector on the PCI riser card (see "Installing an adapter" on
page 59).
Attention: Incomplete insertion might cause damage to the server or the adapter.
Step 10. Connect the mini-SAS signal cables to the connectors on the RAID adapter.
Step 11. Align and install the PCI riser-card assembly in the server (see "Installing a PCI riser-card
assembly" on page 137).
Figure 73. PCI riser-card assembly installation
Step 12. Route the cables underneath the cable retention .
88
Lenovo System x3650 M4 Installation and Service Guide
PCI riser-card
assembly
Adapter
Bracket
Expansion-slot
cover