SAS/SATA
power cable
Figure 84. SAS power cable routing
Step 15. If you removed any fans, install them.
Step 16. Insert the hard disk drives and the fillers the rest of the way into the bays.
If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on
page 136.
Installing a 16x2.5-inch Hot-Swap HDD Assembly Kit for 12Gb/6Gb RAID
Use this information to install a 16x2.5-inch Hot-Swap HDD Assembly Kit for 12Gb/6Gb RAID.
You can install a System x3650 M4 16x2.5-inch Hot-Swap HDD Assembly Kit for 12Gb/6Gb RAID. See
http://www.lenovo.com/ serverproven/ for a list of supported optional devices. To order a 16x2.5-inch
Hot-Swap HDD Assembly Kit for 12Gb/6Gb RAID, contact your sales representative or reseller.
The 16x2.5-inch Hot-Swap HDD Assembly Kit for 12Gb/6Gb RAID contains the following components:
• One hot-swap HDD backplane
• One power cable
• One configuration cable
• Two mini-SAS cables
• Eight 2.5-inch HDD fillers
98
Lenovo System x3650 M4 Installation and Service Guide