Lenovo System x3650 M4 Installation And Service Manual page 131

• Configuration cable 1
• SAS signal cables 2
• Power cable 3
Configuration
cable
Figure 109. Cable connections
Step 8. Touch the static-protective package that contains the RAID adapter to any unpainted metal surface
on the server. Then, remove the RAID adapter from the package.
Step 9. Remove the PCI riser-card assembly 2 (see "Removing a PCI riser-card assembly" on page 37).
Step 10. Install both RAID adapters in the connectors on the PCI riser card (see "Installing an adapter" on
page 59).
Attention: Incomplete insertion might cause damage to the server or the adapter.
Step 11. Connect the SAS signal cables to the connectors on the RAID adapter:
a. Connect a SAS signal cable that comes with the option kit to the RAID adapter connector
for drive bays 16-19.
b. Connect another SAS signal cable to the other SAS connector for drive bays 20-23.
SAS signal cables
eXFlash 1.8-inch drive cage
and backplane assembly
Power
cable
.
Chapter 2 Installing optional devices
119