Removing The System Battery - Lenovo System x3650 M4 Installation And Service Manual

Machine type: 7915

Hide thumbs Also See for System x3650 M4:

Table of Contents

USB embedded

flash device

Figure 228. USB hypervisor flash device installation

Align the flash device with the connector on the system board and push it into the USB

connector until it is firmly seated.

Pull up the blue locking collar to lock the flash device into the USB connector.

Reconnect the power cords and any cables that you removed.

Replace the cover (see "Replacing the cover" on page 240).

Slide the server into the rack.

Turn on the peripheral devices and the server.

Removing the system battery

The following notes describe information that you must consider when replacing the battery.

• Lenovo has designed this product with your safety in mind. The lithium battery must be handled correctly

to avoid possible danger. If you replace the battery, you must adhere to the following instructions.

Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.

• If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal

components, be aware of the following environmental consideration. Batteries and accumulators that

contain heavy metals must not be disposed of with normal domestic waste. They will be taken back

free of charge by the manufacturer, distributor, or representative, to be recycled or disposed of in a

proper manner.

• To order replacement batteries, call 1-800-IBM-SERV within the United States, and 1-800-465-7999 or

1-800-465-6666 within Canada. Outside the U.S. and Canada, call your support center or business

Removing and replacing components