Lenovo System x3650 M4 Installation And Service Manual page 341

Installation tool
Microprocessor
Figure 240. Installation tool alignment
c. Using the following instructions for your installation tool to remove the microprocessor.
• If using Installation Tool A, gently twist the handle clockwise to the closed position and
lift the microprocessor out of the socket.
• If using Installation Tool B, gently twist the handle of the installation tool clockwise until it
locks in the "H" or "L" position, depending on the size of microprocessor, and then lift the
microprocessor out of the socket.
Microprocessor
Figure 241. Installation tool handle adjustment
d. Lift the microprocessor out of the socket.
Alignment
pins
Handle
Installation
tool
Chapter 6
.
Removing and replacing components
329